The installer chose ICC products for their consistent performance, compliance with NEC code, and ease of installation across all 234 residential units.

With over two decades of experience in low-voltage and access control systems, the installer deployed a complete structured cabling system using ICC’s certified connectivity and cable management products.

Structured Cabling System Overview

The project included:

• Over 165,000 feet of UL Certified CAT6 Bulk Cable

• 205 × Residential Wiring Enclosures – 14″ plastic models

• 1,200+ CAT6 terminations using HD Style Keystone Jacks

• Modular Patch Panels – 24- and 48-port, high-density

• Faceplates and J-Hooks for routing and drops

• Wall-Mount Equipment Racks in 8U, 15U, and 30U sizes

Installer Feedback

★★★★★ “Easy to pull and terminate. No kinks; will be buying again when needed.”

★★★★★ “One critical feature was the solid copper. I wanted to ensure that my speed wouldn’t suffer when running long sections of wire. I’m very happy with this wire, and for the price, it can’t be beat.”

All products used in this installation were part of ICC’s end-to-end structured cabling system and are certified to meet NEC fire safety codes and UL standards, helping ensure smooth inspection and long-term reliability.

Looking to build out a multi-family cabling system?

See ICC Bulk Cable Solutions

The post ICC Elite Installer Cables 234-Unit Residential Project in Vineyard, Utah appeared first on ICC.

An ICC Elite Installer successfully completed a new network cabling installation for an outpatient surgical center in Troy, Michigan. Using ICC’s Category 6 (CAT6) cabling, the project aimed to establish a reliable and scalable infrastructure to support the center’s communication needs.

Challenge

The surgical center required a new network infrastructure to handle increasing data traffic and improve voice communication reliability. The project needed a solution that would provide high-speed connectivity, minimal downtime, and future-proof scalability.

Solution

The ICC Elite Installer implemented ICC’s CAT6 solid cables and connectivity components. Key materials included:

• CAT 6 Plenum Cable: Approximately 95,000 feet across various colors (blue, gray, green, yellow, and white)
• CAT 6 Keystone Jacks: 1,125 jacks in various colors (blue, gray, green, yellow, and black)
• CAT 6 Feed-Through Patch Panels: 30 units
• CAT 6 Slim Patch Cords: 1,110 cords in various lengths and colors (blue, gray, green, yellow, and black)
• Surface Mount Boxes: 100 units
• Open Frame Distribution Racks: 4 units
• Vertical Finger Duct: 8 units
• Cable Ladder Rack: 60 feet
• Station ID Faceplates: Approximately 220 units in various styles, including single-gang, 1-port, 2-port, and 4-port

The installation covered various work areas, including:

• 39 Offices
• 7 Meeting Rooms
• 2 Co-working Spaces
• Reception Area
• 4 Conference Rooms
• 2 Small Meeting Rooms

The total finished area of the floor is 12,679 square feet.

Execution

The ICC Elite Installer executed the project with precision and efficiency, ensuring minimal disruption to the surgical center’s operations. The process included:

1. Assessment and Planning: Evaluating the needs for the new network and planning the cabling layout.
2. Installation: Running Category 6 cables through designated pathways, installing patch panels, surface mount boxes, distribution racks, double-sided vertical finger ducts, and ladder racks.
3. Testing and Validation: Conducting thorough testing to ensure optimal performance and reliability, meeting TIA standards.

Result

The new network infrastructure provided the surgical center with:

Enhanced Connectivity: High-speed data transfer and reliable voice communication.

Scalability: A modular system that can be easily expanded to meet future needs.

Reduced Downtime: Reliable components and professional installation minimized maintenance issues.

Conclusion

The successful completion of this project highlights the expertise of the ICC Elite Installer and the quality of ICC’s Category 6 cabling solutions. The surgical center now benefits from a robust and scalable network infrastructure, supporting its mission to deliver high-quality healthcare.

—

Interested in becoming an ICC Elite Installer and leading projects like this? Learn more here.

Become an ICC Elite Installer

We encourage installers to join the ICC Elite Installer Program to access a wide range of benefits, including Lifetime Performance Warranty. This program offers an opportunity to lead transformative projects like this surgical center upgrade, setting a standard for excellence in the industry. Ready to elevate your installation services and achieve unparalleled success? Register today.

The post ICC Elite Installer Enhances Medical Surgical Center Network with Category 6 Cabling appeared first on ICC.

Project Details: The installation encompassed a wide range of TIA-rated components from ICC, ensuring optimal performance and future-proofing the facilities’ IT infrastructure.

To support the robust network infrastructure required for the manufacturing operations, the installer utilized a series of blank patch panels, including 48-port and 24-port models. These panels were essential in organizing and managing the extensive cabling needs of the facilities. The blank patch panels provided a flexible and scalable solution, allowing for easy updates and additions as the network requirements evolved.

Rack shelves played a crucial role in housing the network equipment securely. The 15″ single vented rack shelves ensured adequate ventilation for the devices, maintaining optimal operating temperatures and enhancing the longevity of the equipment. The sturdy design of the shelves supported the significant load of the network hardware, ensuring stability and reliability.

Effective cable management was achieved through the use of metal ring and cover panels, available in both 1U and 2U configurations. These panels featured horizontal rings and back feed-through holes, which facilitated neat and organized cable routing. Proper cable management was vital in preventing tangles, reducing signal interference, and making maintenance and troubleshooting more efficient.

For the network connections, CAT6 keystone jacks in high-density style were used extensively. These high-density modules ensured high-speed data transmission and reliable connectivity across the network. The modular design allowed for easy installation and replacement, supporting the dynamic nature of the manufacturing facilities’ IT needs.

Surface mount boxes provided a versatile solution for connecting network endpoints in various locations within the facilities. The 1-port surface mount boxes were strategically placed to ensure accessibility and convenience, supporting the diverse operational areas of the manufacturing processes.

The backbone of the network was built using 159,000 feet of CAT6 cable, specifically CAT6 500 MHz UTP solid cables. These cables provided robust and high-speed connections between different parts of the facilities. The cables’ TIA-rated construction ensured reliable performance and minimized downtime, which is critical in a manufacturing environment where continuous operation is paramount.

To complete the installation, CAT6 slim patch cords were used to connect devices to the network. These patch cords, with their reduced cable diameter and snag-free design, facilitated easy and efficient connections while saving space in the cable management systems.

Challenges and Solutions: The project faced several challenges, including meeting stringent technical specifications and integrating the new network infrastructure seamlessly with existing systems. The ICC Elite Installer’s expertise and strategic approach were pivotal in addressing these challenges:

• Technical Precision: Each component was carefully selected and installed to meet the specific needs of the facilities, ensuring high performance and reliability.
• Seamless Integration: The team conducted thorough pre-installation assessments and post-installation testing to ensure flawless integration with the existing IT infrastructure.

Key Milestones:

• Initial Assessment: A comprehensive site survey and needs assessment were conducted to understand the specific requirements of both facilities.
• Installation Phase: Over several weeks, the team systematically installed the network components, adhering to strict timelines and quality standards.
• Testing and Validation: Extensive testing was carried out to validate the performance and reliability of the new network infrastructure.

Outcomes and Benefits: The successful completion of the Amarillo/Odessa project resulted in state-of-the-art IT networks for both manufacturing facilities. The TIA-rated ICC components and expert installation provided numerous benefits:

• Enhanced Network Performance: The new IT infrastructure offers superior data transmission speeds and reliability, crucial for modern manufacturing operations.
• Scalability: The network design allows for easy expansion and upgrades, ensuring the facilities can accommodate future growth and technological advancements.
• Operational Efficiency: The robust and reliable network supports efficient manufacturing processes, reducing downtime and improving overall productivity.

Conclusion: The Amarillo/Odessa IT networks project stands as a testament to the ICC Elite Installer’s ability to deliver TIA-rated, scalable network solutions tailored to the specific needs of manufacturing facilities. This success story underscores their commitment to excellence and their capability to handle complex installations with precision and efficiency.

Interested in becoming an ICC Elite Installer and leading projects like this? Learn more here.

Become an ICC Elite Installer We encourage installers to join the ICC Elite Installer Program to access a wide range of benefits, including premium products and dedicated support. This program offers an opportunity to lead transformative projects like the city hall upgrade, setting a standard for excellence in the industry. Ready to elevate your installation services and achieve unparalleled success? Register today.

The post Amarillo/Odessa IT Networks for Manufacturing Facilities in Texas appeared first on ICC.

Detailed Project Implementation

The upgrade encompassed a broad spectrum of ICC’s high-quality structured cabling components, ensuring a robust and scalable network infrastructure:

• Category 6 and Category 6A Cabling: The foundational layer of the network was strengthened with ICC’s Category 6 500 MHz UTP Solid Cable and Category 6A 650 MHz UTP Solid Cable, crucial for high-speed data communication.
• Cable Management Solutions: Efficient cable organization was achieved through the use of ICC’s diverse range of J-Hooks, ensuring a neat and structured cabling layout.
• Vertical Finger Ducts: The inclusion of Vertical Finger Ducts facilitated effective management of cables within the network racks, enhancing airflow and ease of access.
• Ladder Rack Runways: Ladder Rack Runways were installed to provide a solid framework for horizontal cable distribution, crucial for maintaining a tidy and organized cable pathway.
• Patch Panels and Accessories: The network’s connectivity was bolstered with the use of ICC’s Patch Panels, complemented by an assortment of keystone jacks and faceplates, ensuring seamless integration of network access points throughout the facility.

Outcome

This comprehensive upgrade has significantly bolstered the city hall’s network infrastructure, ensuring enhanced efficiency and a solid foundation for future technological integration. The project highlights the critical role of ICC Elite Installers in delivering tailored, high-performance networking solutions for public institutions.

Interested in becoming an ICC Elite Installer and leading projects like this? Learn more here.

Become an ICC Elite Installer

We encourage installers to join the ICC Elite Installer Program to access a wide range of benefits, including premium products and dedicated support. This program offers an opportunity to lead transformative projects like the city hall upgrade, setting a standard for excellence in the industry. Ready to elevate your installation services and achieve unparalleled success? Register today.

The post Network Upgrade at a City Hall in Virginia: A Comprehensive ICC Elite Installer Project appeared first on ICC.

Project Overview

The project entailed a complete update of the center’s communication systems to bolster care services and operational efficiency. A crucial component of this upgrade was the installation of 20,000 feet of ICC’s Category 6 500 MHz UTP Solid Cable in yellow, which is essential for a robust and forward-compatible network.

Efficient Routing and Connectivity

For effective cable management, the installer implemented 400 ICC 2-inch wall mount J-Hooks. These J-Hooks, known for their durability and 50 lbs load capacity, were critical in supporting the new cabling infrastructure while maintaining the center’s clean and organized environment.

High-Quality ICC Components

A selection of ICC’s top-quality components was used in the installation:

• CAT 6 Modules: The network’s capacity for high-speed data transmission was ensured by the use of 4 packs of 25 yellow CAT 6 HD modules.
• Patch Panels: To manage cables efficiently, 20 units of 24-port and 5 units of 48-port HD blank patch panels were mounted. These 19″ wide patch panels provide an organized and accessible cable framework.
• J-Hooks: Supporting the cabling were 16 packs of 2-inch J-Hooks, chosen for their high load capacity and included retainers.
• Patch Cords: Connectivity was maintained with 20 packs of 1-foot yellow CAT 6 patch cords featuring clear boots, designed for low-profile and snag-free strain relief.
• Faceplates: The aesthetic integration of connectivity points was achieved with 2 packs each of one-gang, one-port, and two-port white faceplates, compatible with single gang outlets and CAT 6 HD and EZ modules.
• Bulk Cable: Central to the project was the use of 20 REELEX II cartons of CMP Plenum-rated CAT 6 500 UTP solid cable, ensuring both performance and safety compliance across the network.

Lasting Benefits

This installation has not only advanced the technological framework of the Assisted Living Center but also highlighted ICC’s dedication to delivering dependable solutions for healthcare facilities. The installer’s work ensures that the center is poised to provide exceptional care with an infrastructure built for effective communication and data management.

ICC is proud to contribute to the enhancement of a vital community establishment, reaffirming that ICC’s cabling solutions and partnerships set the standard in the industry.

Join the Elite Installer Program: Elevate your business with the distinction of being an ICC Elite Installer. Register Now and start your journey towards unparalleled success and recognition in the industry.

The post ICC Elite Installer Enhances Connectivity at Portland Assisted Living Center appeared first on ICC.

The Challenge:
Given the hotel’s new construction phase, it was crucial to establish a sophisticated communication network right from the outset. The ICC Elite Installer was responsible for designing and implementing this network infrastructure without disrupting ongoing construction activities.

The Solution:
Emphasizing innovation and precision, the ICC Elite Installer meticulously designed the network installation plan for El Paso, Texas. They deployed Category 6, 500 MHz UTP (Unshielded Twisted Pair) Solid Cable with 23 AWG (American Wire Gauge), 4 pairs, CMR (Riser Rated), 1000ft Reelex Carton, in Green, White and Blue colors. This choice ensured reliable, high-speed connectivity throughout the hotel premises. Complemented by EZ Category 6 modules in Green, White, and Blue, these cables formed the backbone of the communication network, catering to diverse requirements.

Strategic utilization of 1-gang faceplates in White, accommodating 1-, 2-, and 4-port configurations, facilitated versatile connectivity across hotel rooms and back-office spaces in El Paso. Additionally, the installation of Cat6 Patch Panels – 48-Port, 2 RMS, and 24-Port, 1 RMS with 110 Punch Down allowed for organized cable management, along with front finger duct panels in various sizes, streamlining the process further.

To facilitate connectivity between the MDF and IDF, the installer employed Category 5e Patch Panels – 24-Port, 1 RMS with 110 Punch Down. Furthermore, the integration of distribution racks and rack-to-wall ladder runway kits allowed for the organized and aesthetically pleasing placement of network components in the newly constructed hotel in El Paso, Texas.

The Impact:
The successful execution of this advanced network installation by the ICC Elite Installer set the stage for a seamless operational infrastructure in the new hotel in El Paso, Texas. The deployment significantly elevated guest experiences by providing uninterrupted connectivity for voice, data, and entertainment services right from the inception. Moreover, the efficient network setup empowered the staff, ensuring smooth back-office operations from day one.

This comprehensive project exemplifies a forward-thinking approach, laying a strong foundation for the new hotel’s technological excellence in El Paso, Texas, and establishing a benchmark for modern establishments aiming for superior service and infrastructure quality from their inception.

Join the Elite Installer Program:
Elevate your business with the distinction of being an ICC Elite Installer. Register Now and start your journey towards unparalleled success and recognition in the industry.

The post Establishing Modern Connectivity: Comprehensive Network Installation for a New 100-Room Hotel in El Paso, Texas appeared first on ICC.

The Challenge:

The hospital sought to upgrade its communication network. The ICC Elite Installer was brought in to create a network solution that seamlessly integrated with existing operations.

The Solution:

The ICC Elite Installer provided a straightforward solution. A 7-foot, 45 RMS distribution rack became the central point of the network. Wall-mounted hinged brackets and vertical finger ducts mounted to the rack ensured efficient use of space and easy maintenance. Front finger duct panels, organized at 2 RMS each, simplified cable management.

The core of the network featured high-performance components like 48-port, 2 RMS Cat 6 and Cat 6A patch panels. These were paired with Cat 6 and Cat 6A keystone jacks in various colors, offering flexibility to meet the hospital’s diverse communication needs.

Details included 1-gang flat faceplates for 1, 2, and 4-port configurations. F-type nickel-plated modules provided a reliable connection for high-frequency signals. The installer’s attention extended to the choice of cabling – a 23AWG 4-Pair CMR-rated Cat 6 cable, spanning 3000 feet, forming a robust foundation for seamless data flow.

The Impact:

The deployment of these solutions empowered the Maine hospital with an upgraded communication network. The ICC Elite Installer’s straightforward approach not only met but exceeded expectations, delivering a solution that improves patient care, streamlines operations, and positions the hospital as a technological leader in healthcare.

The post Empowering Communication: A Practical Network Setup for a Maine Hospital appeared first on ICC.

The Challenge: The custom metal manufacturer required a robust and high-speed data cabling system to support their operations efficiently. They faced the challenge of outdated cabling infrastructure, which hindered their data transfer speeds and productivity. The ICC Elite Installer was tasked with updating the entire cabling system to modern standards.

The Solution: The ICC Elite Installer implemented a high-performance solution. They utilized 64,000 feet of solid Cat6A FTP cable, specifically designed for high-performance networking. This cabling was complemented by 250 J-hooks to ensure secure and organized cable management. To support connectivity throughout the facility, 80 Cat6A shielded FTP jacks were expertly installed.

Enhanced Connectivity: The project also included the installation of 74 faceplates with ID labeling, 126 Elite Surface Mount Boxes to accommodate various modules, and 20 front finger duct panels for cable routing. To ensure flexibility and future expansion, 12 blank Cat6A FTP patch panels were incorporated into the network design.

Fiber Network Integration: Recognizing the importance of fiber-optic connectivity, the ICC Elite Installer seamlessly integrated a fiber network into the solution. Four rack enclosures, each housing three panels, were installed. This allowed the custom metal manufacturer to leverage LGX adapter panels with quad LC connectors for optical connectivity.

Results: Upon project completion, the custom metal manufacturer experienced a significant improvement in their network infrastructure. The enhanced data cabling system facilitated faster data transfer speeds, reduced downtime, and improved overall efficiency. The manufacturer was now well-equipped to meet the demands of their operations, ensuring seamless communication and data flow.

About ICC Elite Installers: ICC Elite Installers are skilled professionals known for their excellence in network infrastructure projects. They ensure that installations are not only efficient but also adhere to industry standards, including TIA® specifications.

The post ICC Elite Installer Excels in Data Cabling Project for Custom Metal Manufacturer appeared first on ICC.

The installer constructed a network using a CAT6 structured cabling system, totaling 50,000 feet of CAT6 plenum cable. The installer also used 100 CAT6 keystone jacks, 100 three-foot clear boot patch cords, and along with 100 one-foot clear boot patch cords. Finally, the installer used 2” and 1 5/16” J-Hooks and a 24-port patch pane to manage the cables.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post ICC Elite Installer Awarded Cabling for Regional High School appeared first on ICC.

The installer constructed a network using a CAT6 structured cabling system, totaling 68,000 feet of CAT6 plenum cable, 250 CAT6 keystone jacks in white, 130 one-foot and 250 three-foot clear boot patch cords in black, 130 one-port wall plates, 130 one-gang white junction boxes, 16 1U cable management panels, and 5 2U cable management panels.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post ICC Elite Installer Wins Cabling Contract to Upgrade Cabling in Westville Schools appeared first on ICC.

The installer constructed a network using a CAT6 and CAT5e structured cabling system, totaling 100,000 feet of CAT6 and CAT5e riser cable, 1,400 CAT6 EZ keystone jacks, 10 wall-mount racks (18 inches with 8rms), 400 voice wall plates (6P6C in both ivory and white), and 20 wall plates (6P6C telephone in white).

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post Lodge and Resort Enhances Contract with ICC Elite Installer to Add 1,400 Data Drops appeared first on ICC.

The installer constructed a network using a CAT6 structured cabling system, including 75,000 feet of CAT6 plenum cable, 2,300 CAT6 EZ modules, 600 faceplates, 400 surface mount boxes, ten 5-foot ladder rack runaways, and ten 2-pack runaway cable radius drops.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Lodge and Resort in Tennessee Contracted an ICC Elite Installer to Install 1,150 Drops appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Large Warehouse Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Hospice Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Military Branch Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Call Center Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post An Apartment Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Highrise Apartment Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

Upon completing the installation, the Elite Installer tested and passed the system to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A Credit Union Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.

After the installation, the installer tested and passed the system’s permanent link to TIA® spec.

To become an ICC Elite Installer, please visit icc.com/elite.

The post A High-Rise Residential Apartment Awards a Cabling Contract to an ICC Elite Installer appeared first on ICC.